SCI论文:

1. Lingli Cui, Na Wu, et al. Quantitative fault analysis of roller bearings based on a novel matching pursuit method with a new step-impulse dictionary [J]. Mechanical Systems & Signal Processing, 2016, 68-69:34-43.( 中科院一区，IF=5.005)

2. Na Wu, Shujun Chen, Jun Xiao. Wavelet analysis-based expulsion identification in electrode force sensing of resistance spot welding [J]. Welding in the World, 2018, 62(4):729-736. (IF=1.206)

3. Shujun Chen, Na Wu, et al. Expulsion Identification in Resistance Spot Welding by Electrode Force Sensing based on Wavelet Decomposition with Multi-indexes and BP Neural Networks [J]. Applied Sciences, 2019,9(19),4028.(IF=2.217)

4. Lingli Cui, Na Wu, et al. Sensor-based vibration signal feature extraction using an improved composite dictionary matching pursuit algorithm [J]. Sensors, 2014, 14:16715-16739. ( IF=2.475)

EI论文:

1. 陈树君, 邬娜, 等. 压电致动器辅助电阻点焊工艺实现及飞溅控制 [J]. 焊接学报, 2020.

会议论文：

1. Na Wu, Shujun Chen, et al. Wavelet Analysis based Splashing Identification in Electrode Pressure Sensing of Servo-torch Resistance Spot Welding. 2017 International Institute of Welding, 2017.6, ShangHai.

2. Shujun Chen, Na Wu, et al. A novel macro-micro pressure control technology of aluminum alloy resistance spot welding process based on piezoelectric actuator. 97th AWS Professional Program and Poster Session, 2016.10, Las Vegas, USA.

3. Shujun Chen, Na Wu, et al. Microstructure and strength of aluminum alloy jointed by piezoelectric actuator augmented resistance spot welding. Materials Science and Technology Conference, 2018.10, Columbus, USA.

4. Shujun Chen, Na Wu, et al. Detection of Expulsion in Resistance Spot Welded Aluminum Alloy from Electrode Force. Sheet Metal Welding Conference, 2018.10, Detroit, USA.

5. Shujun Chen, Na Wu, et al. A Novel Piezo-Actuator Enhanced Resistance Spot Welding Process. 98th AWS Professional Program, 2018.11, Atlanta, USA.

6. 崔玲丽, 邬娜, 等.不同迭代终止条件下的正交匹配追踪算法及其应用. 全国设备监测诊断与维护学术会议, 2014.08, 秦皇岛.

7. 崔玲丽, 康晨晖.匹配追踪及优化算法在齿轮故障诊断中的应用. 全国振动工程及应用学术会议, 2012.08, 郑州.

国家发明专利：

1. 崔玲丽, 邬娜, 等. 一种基于并行多字典正交匹配的齿轮故障诊断方法, 国家发明专利授权, ZL201410356780.3.

2. 崔玲丽, 邬娜, 等.一种基于阶跃-冲击原子库MP算法的轴承故障定量诊断方法, 国家发明专利授权, ZL201410356816.8.

3. 崔玲丽, 邬娜, 等.一种基于多指标特征的双字典匹配追踪轴承故障程度评价方法，国家发明专利授权, ZL201410379606.0.

4. 陈树君, 邬娜, 等. 一种压电驱动主动施压的电阻点焊飞溅抑制方法, 国家发明专利实质性审查, CN202010254083.2.

5.肖珺, 邬娜, 等.一种压电致动器辅助施压的电阻焊接方法中国, 国家发明专利实质性审查, CN201910200942.7.